UM-5DL Ultrasonic Thickness Gauge Test Meter A/B Scaning 0.02"-20" TC 510 Probe

Description

Store category
Thickness Gauges
Ultrasonic Flaw Detectors
Ultrasonic Probes
Ultasonic Test Blocks
Hardness Testers
Coating Thickness Gauge
UV NDT Lamps
X-Ray Film Viewers
Densitometers
Ultrasonic Cables
Other
Sign Up Now !
You may also like
UM-5DL UltrasonicThickness Gauge Test Meter A/b-Scan 0.001" Range 0.02"-20"
Product Description
Application
UM-5 series gauge certificated by CE can be widely used in metal processing industry, aerospace, railway transportation, chemical industry, commodity inspection industry and other testing fields. In addition to accurate measurement of various plates and various processed parts, it can also monitor various pipelines and pressure vessels in production equipment, and monitor the degree of thinning after they are corroded during using. It is a essential equipment in non-destructive testing industry.
Features
● Real-time color A-scan
The user can directly see the color ultrasonic signal wave pattern on the screen, which is essential for occasions where it is necessary to verify that the thickness reading is correct. In many cases, erroneous thickness readings or even no readings can be arised in measuring, the problem can be easily found  according to the waveform. Then, according to the waveform, only the three parameters of GAIN, BLANKING and GATE need to be adjusted appropriately,then the correct thickness reading can be obtained.
● Adjustable gate height
Only when the echo is higher than the gate, the instrument will receive the echo and the measurement value will be available. It can be seen that the importance of adjustable gate height, especially in the application of low echo signal (such as the measurement of ultra-thin plate and ultra thick plate).
● Red arrow
A-scan mode has a red arrow to indicate the measuring point, and the thickness reading is the abscissa of this point. It can help judge whether the thickness reading is correct. When measuring correctly, the red arrow should point to the front end of the first bottom echo.
● Gain adjustment
Adjust the magnification of the echo signal, allowing manual increase or decrease in units of lDB. This function is very effective for the measurement of sound attenuating materials (such as metal castings).
● Blanking function
Invalidating the waveform in the range of the red blanking bar can omit harmful clutter that affects the measurement, such as the noise caused by the rough surface of the material or the internal unevenness.
● Scope
Adjust the range of the waveform displayed on the screen, the waveform is visually compressed or expanded. If the display range is not set correctly, the echo waveform may be out of the display area and cannot be seen, but the measured value can still be displayed correctly.
● Pan
Adjust the starting position of the waveform displayed on the screen, the waveform is visually moved horizontally. If the translation is not set correctly, the echo waveform may be out of the display area and cannot be seen, but the measured value can still be displayed correctly. The range and pan function can magnify any part of the waveform and display it on the screen.
● Real-time color B-scan
UM-5 series thickness gauges are equipped with real-time B-scan function. Display the profile view of the workpiece along the movement track of the probe, which is used to observe the bottom surface profile of the workpiece under test. And automatically capture the minimum value on a B-scan image, and the position of the minimum value is indicated by the red triangle. You can also view the thickness value of any point on the B-scan image by moving the pointer.
● Larger memory, more convenient storage function
It can store 100,000 thickness values and 1000 A and B scan waveforms. The waveforms and thickness values can be stored in the same file; the grid-style storage file is adopted, and 15 thickness values can be displayed on one screen and displayed in the grid at the same time The location is convenient for users to browse the stored thickness data; USB 2.0 Full Speed (Full Speed) interface, powerful DataView data statistics and management software.（for UM-5DL）
● More useful functions
Difference/reduction rate: The difference mode displays the change in the difference between the measured thickness and the preset thickness. The reduction rate is to calculate and display the percentage of thickness reduction after the material becomes thinner. A typical application is to measure metal materials that have become thinner due to bending.
Maximum/minimum value capture: The current thickness value, minimum value and maximum thickness value are displayed on the screen at the same time.
Alarm mode: dynamically change the color of the thickness reading when alarming.
The update rate is 4Hz, 8Hz, 16Hz adjustable: 4Hz can be selected for common applications, and a higher update rate can be selected when fast scanning is required, such as high temperature measurement.
Specifications
Display
2.4" color OLED, 320 X 240 pixels, contrast 10,000:1
Operating Principle
Pulse echo with dual element transducers
Measuring Range
0.025" to 20.00", depending on material, probe and surface condition0.
Limits of Tube (Steel)
Φ0.787 in×0.118 in(Standard probe)
Φ0.590 in×0.0787 in(PT-06 probe)
The measuring error is up to ±0.0039 in
Resolution
Optional  0.001",0.01"
Gain
Adjustable
Probe Calibration
One-Point Calibration, Two-Point Calibration
Measuring Error
±0.0019 in (Low limit to 0.894 in)
±0.2%H(0.894 in to 3.937 in)
±0.5%H(3.937 in to Up Limit)
Update Rate
Selectable 4Hz, 8Hz, 16Hz
Material Velocity Range
0.0197 in/us to 0.3937 in/us
Stability of the Values
Based on full digital technology, with zero cross measurement technology, the measured value will not be affected by echo intensity, material attenuation coefficient, gain and the height of gate, keep high measurement stability and reliability.
Repeatability
±0.0019in
Display Mode
Normal, Minimum / Maximum capture, DIFF/RR%
V-Path Correction
Automatic
Languages
Selectable Chinese, English, Germany, etc.
Alarm Settings
Minimum and Maximum alarms.
Dynamic waveform color change on alarm
Power
2 AA size batteries
Operating Time
Approximately 40 hours
Instrument Shut-off：
Selectable ALWAYS ON or AUTO OFF after 5, 10, 20 minutes of inactivity
Capacity
100,000 readings, 1000 waveforms, 400 files
Operating Temperature
-10°C to +50°C (+10°F to +120°F)
Size
6 in × 3 in ×1.5 in (H × W × D)
Warranty
1 year
Weight
7 oz (including batteries）
Standard Configuration
Ultrasonic Thickness Gauge,Standard Probe(TC510),Instrument Case,Couplant Bottle,Operating Manual, Certification, Packing List. (Batteries are  not included)
Optional Accessories
Various Probes, Probe Cables, Step Calibration Blocks, Communication Software and Rubber Sheath.(extra payment)
Payment
Delivery details
Terms of sales
About us
Contact us
Payment
We only accept payment through PayPal.
Delivery details
We support Fedex, DHL, TNT and EMS.
We only ship to your PayPal address,if other address,please advise us by eBay E-mail.
Import duties and taxes are not included in item price or shipping charges.These charges are buyer's responsibility.
Terms of sales
We accept returns within 30 days.
We encourage all customers to communicate with us through eBay messages. If you have any questions or comments whatsoever regarding our products or listing, we are waiting to hear from you.
A 1 year warranty is offered for our instruments(NOT INCLUDING PARTS). If the instruments malfunctioned under proper usage per instructions manual within the warranty period, please contact us to obtain shipping instructions and send it back .
30 days evaluation and investigation take place after receiving your return item. A brand new replacement unit will be sent to you at our shipping costs if it meets our warranty requirements.
About us
YUSHI INSTRUMENTS，formerly the Shenyang Flaw Detector Factory, originated in 1985. As one of the professional manufactures and suppliers of NDT products in China, we own the independent intellectual property rights and honorably have the national patents for new products. we have a strong R&D team for technical support and extending new products year by year, Now they have been exported to many countries of the world and won good reputation from our domestic and foreign customers. we aim to provide our customers with reliable quality, high performance products, fast delivery, satisfactory service and competitive price.
Contact us
If you have any other questions, please contact our eBay customer service , we will reply within 24 hours.
Payment
Delivery details
Terms of sales
About us
Contact us